Description

Buck PORT-A-WRAPS are compact rope friction devices designed for lowering heavy objects from height in a controlled and predictable manner. The Buck Port-A-Wrap has been widely popular among the modern-day arborist, old school arborist would lower heavy wood by wrapping the lines around nearby trees causing damage to trees and often causing accidents. With the Buck Port-A-Wrap lowering heavy wood can be controlled and done at a much faster pace while also lowering the potential for an accident. The user-friendly design also makes attaching rigging line a breeze!

Designed to facilitate easy attachment of rope for anchorage to base of tree providing a rope retention bar, for added safety. Eliminates the possibility of losing a wrap, even if your rigging line slacks. With the addition of a "second eye" in this design, the operator can attach a block and tackle using an ascender, to their rigging line and hoist up a limb, preventing it from coming into contact with a house or power line, etc.

• 7.25"L x 9"H x 1.9"OD
• Maximum rope size: 5/8
• Weight: 4lbs
• Powder coated black
• MBS: 12 000 lbf
• WLL: 2 000 lbf

Many of those who work on towers are now beginning to use the port-a-wrap as a cost-effective friction control device. By simply attaching the port-a-wrap to the base of a tower, you can use it to safely lower loads (like a set of bells) from an elevated location. The additional eye allows the user to attach a set of rigging blocks like the Buck Riggers or the Buck Side Swivels to raise loads prior to lowering them. Tie off/redirect cleats allow users to snub off a load. It also redirects the rope allowing the user to operate the Port-a-wrap without being underneath the load. Both the small (601N for 5/8” rope) and large (601LN for ¾” rope) have a 2000 pound working load limit.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov